• English
  • United Kingdom(GBP £)
FREE delivery spending over £20. FREE delivery spending over £20!
/ /

Jump Store Birthday Goods for Gintama's Sakamoto Tatsuma and Sakamoto Days' Hyo, Plus Haikyu!! Acrylic GIGA Figures to Order by 23 November

Nov 20,2026 | Otaku Daily Shop UK

Jump Store's autumn birthday wave is on the shop, and it covers three very different favourite characters. Gintama's Sakamoto Tatsuma, whose birthday falls on 15 November, and Sakamoto Days' Hyo, who is celebrated on 14 November, now have can badges and special acrylics to pre-order at Otaku Daily, with a November 2026 release. Alongside them are made-to-order Haikyu!! Acrylic GIGA figures of Yamaguchi Tadashi and Futakuchi Kenji — and those two have a hard stop on 23 November 2026.

Key facts at a glance

  • Headline releases: Jump Store birthday can badges and acrylics for Gintama's Sakamoto Tatsuma (15 November) and Sakamoto Days' Hyo (14 November), due in November 2026
  • Tatsuma: a 75 mm can badge and a Famous Scene Diorama Figure ~SHINING~, which assembles to about 10.7 cm wide
  • Hyo: a 75 mm can badge and an Acrylic "X" Figure that stands about 11.5 cm tall once assembled
  • Time-sensitive: made-to-order Haikyu!! Acrylic GIGA figures of Yamaguchi Tadashi and Futakuchi Kenji must be ordered by 23 November 2026; they are due in late April 2027 and stand around 46 to 49 cm tall
  • Also new: a Haikyu!! birthday can badge for Yamaguchi Tadashi, due in November 2026

Sakamoto Tatsuma's birthday goods

Tatsuma's birthday set is a classic Jump Store pairing: a big can badge and a scene-style acrylic. The Gintama Birthday Can Badge Sakamoto Tatsuma is about 75 mm across, in tinplate, paper, iron and PET, and it shows him in his sunglasses and high-collared look with a bold "2026 Happy Birthday 11.15" flash on the front. It is a display badge as much as a pin, and it comes in a holographic "Happy Birthday 2026" backing card.

Jump Store Gintama birthday can badge of Sakamoto Tatsuma, with a 15 November 2026 birthday mark

Image: © Hideaki Sorachi/Shueisha (Jump Characters Store)

The companion piece is the Famous Scene Diorama Figure ~SHINING~ Sakamoto Tatsuma. It arrives as a hologram acrylic sheet of about 9.5 by 14.5 cm and assembles into a little stage about 10.7 cm wide, 8.7 cm tall and 2.4 cm deep. The finished diorama places Tatsuma in his red coat against a sparkling backdrop, with a name plate marked 15 November 2026 and a small extra panel of comic artwork. The hologram sheet gives the backdrop a shimmer once it is built, and it is a compact way to put a favourite Gintama moment on a desk without needing a large figure.

Hyo's birthday goods from Sakamoto Days

Hyo's set follows a similar idea with a tougher, punchier design. The Sakamoto Days Birthday Can Badge Hyo is also about 75 mm, in the same materials, and it marks 14 November 2026 across a coloured burst behind his portrait. Next to it, the Birthday Acrylic "X" Figure -with- Hyo uses a crossed acrylic stand instead of a flat plinth. The sheet starts at about 13.8 cm square and builds into a figure about 10.6 cm wide, 11.5 cm tall and 6.8 cm deep, with Hyo mid-swing in his red shirt and chains. It is a sturdy little sculpture that looks good from more than one angle.

Jump Store Sakamoto Days birthday Acrylic X figure of Hyo mid-punch on a crossed acrylic stand

Image: © Yuto Suzuki/Shueisha (Jump Characters Store)

Jump Store Sakamoto Days birthday can badge of Hyo in its Happy Birthday 2026 packing card, marked 14 November

Image: © Yuto Suzuki/Shueisha (Jump Characters Store)

Haikyu!! Acrylic GIGA figures, order by 23 November

The most time-sensitive Jump arrivals this week are two made-to-order Acrylic GIGA figures from Haikyu!!. These are large, 5 mm-thick acrylic constructions with a character cut-out, a circular base, a name plate and an extra panel, and they are genuinely big: Yamaguchi's assembled piece is about 37.9 cm wide and 49.2 cm tall, and Futakuchi's is about 38.7 cm wide and 46.1 cm tall. Because they are made to order, they are only produced for customers who request them by the deadline, and that deadline is 23 November 2026. Release is late April 2027.

The Acrylic GIGA Figure Yamaguchi Tadashi shows him in a shirt and tie, arms outstretched in a receive, with a "Tadashi Yamaguchi" plate on the base and a vertical comic panel at his side. The Acrylic GIGA Figure Futakuchi Kenji is built the same way for the Date Tech blocker, this time in a blue work-style outfit mid-stride, with a "Kenji Futakuchi" name plate and a comic panel at the base. Because these are made to order, they are produced for the customers who place an order by the deadline rather than being made as a long open run, so the 23 November cut-off really does matter. If you have the space for a statement acrylic, these are the pieces to decide on this week, while the window is still open.

Jump Store Haikyu!! made-to-order Acrylic GIGA figure of Yamaguchi Tadashi in a shirt and tie, arms outstretched

Image: © Haruichi Furudate/Shueisha (Jump Characters Store)

Jump Store Haikyu!! made-to-order Acrylic GIGA figure of Futakuchi Kenji

Image: © Haruichi Furudate/Shueisha (Jump Characters Store)

Yamaguchi also has a standard Haikyu!! Birthday Can Badge in the same 75 mm birthday style as Tatsuma and Hyo, due in November 2026, if you want a smaller piece of the same celebration.

Jump Store Haikyu!! birthday can badge of Yamaguchi Tadashi in its Happy Birthday 2026 packing card

Image: © Haruichi Furudate/Shueisha (Jump Characters Store)

How to order

The birthday can badges and acrylics for Tatsuma, Hyo and Yamaguchi are individual pre-orders with a November 2026 release. The two Acrylic GIGA figures are made to order and need to be placed by 23 November 2026. Otaku Daily offers different payment options, for example paying in full or securing your pre-order with a 30% deposit, so you can choose whichever suits you best. You can read more about how pre-orders work on our pre-order information page, and if you have any questions, message us. You can also browse our Gintama, Sakamoto Days, Haikyu!! and Jump Store Limited collections for more from these series.

Whose birthday shelf are you building?

Whether you want Tatsuma's shining diorama, Hyo's crossed acrylic, a 75 mm birthday badge or one of the huge Haikyu!! GIGA figures before the 23 November cut-off, this Jump Store wave has a piece for almost any display. Add your favourites while they are up, and message us if you would like a hand choosing sizes or combining an order.

Want the latest anime merch news first? Follow Otaku Daily on Instagram @otakudaily.uk, Facebook Otaku Daily UK and X @otakudaily_uk for new releases, kuji openings and updates.

Comment

Name
Email
Comment
Trustpilot